De NEXCOM VTC-Serie computers zijn speciaal ontwikkeld voor montage en gebruik in voertuigen en heeft een doordacht fanloos ontwerp met daarbij het automotive E13 keurmerk. Het is mogelijk de NEXCOM te voorzien van diverse communicatiemodules zoals een GPS module voor gebruik voor track en tracing en navigatie een GPRS Module voor data-overdracht en een 3G/4G (UMTS, HSDPA)
module zodat optimale communicatie gewaarborgd is. Door de ondersteuning vantwee video uitgangen is het mogelijk om twee applicaties onafhankelijk van elkaar op twee schermen weer te geven. De PC is voorzien vaneen aparte CPU unit
voor het regelen van de inwendige temperatuur en de energiehuishouding, ter voorkoming van het leeg raken van de boordaccu. Tevens is de PC beschermd tegen piekspanningen zodat deze PC altijd blijft werken. Eventueel is het mogelijk om
of intern of extern een batterij back up kit erbij te plaatsen zodat u kan blijven doorwerken als de spanning weg zou vallen en of netjes de pc kunt afsluiten.
Specificaties:
CPU
.Intel® Core™ processor dual core i5-4300U, 1.9GHz
Memory
.2 channel 204-pin DDR3L SO-DMIM socket support 1333/1600MHz up to 16GB,
default 2GB
Storage
.2 x 2.5" SATA 3.0 SSD/HDD (externally accessible), RAID 0,1
supported (optional lockable storage available)
.1 x CFast (externally accessible)
Expansion
.1 x Full size mini-PCIe socket (USB 2.0)
.1 x Full size mini-PCIe socket (USB 2.0 + PCIe)
.1 x Full size mini-PCIe socket (USB 2.0 + PCIe)
.1 x Half size mini-PCIe socket (USB 2.0 + PCIe)
Function
.1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/ Beidou) or
optional module with Dead Reckoning
.Built-in G-sensor
I/O Interface-Front
.4 x LED for power, storage, WWAN, WLAN
.2 x Externally accessible SATA 3.0 SSD/HDD tray, RFID 0, 1 supported
(optional lockable storage available)
.1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port
.2 x Externally accessible SIM card socket (selectable)
.1 x Phone jack 3.5mm for 1 x Mic-In
.1 x Phone jack 3.5mm for 1 x Line-out
.1 x Externally accessible CFast card socket with cover
.1 x Event button (trigger type)
.1 x Reset button
.3 x Antenna hole for WWAN/WLAN/BT
I/O Interface-Rear
.1 x 9 ~ 36VDC input with ignition and 35W typical power consumption
.1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port
.2 x RJ45 10/100/1000 Fast Ethernet with LED
.1 x Phone jack 3.5mm for 1 x Mic-in
.1 x Phone jack 3.5mm for 1 x Line-out with 1.5W output each
.1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz
.1 x DP port. Resolution up to 2560 x 1600 @60Hz
2 x DB-9 RS-232
1 x DB-9 RS-232/422/485 (RI/5V/12V
selectable)
1 x DB-9 for CAN 2.0B (optional CAN Bus
2.0B mini-PCIe card), 2 x MCU-DI and 2 x MCU-DO
1 x 16-pin terminal block
-1 x CAN Bus 2.0B (on board)
-1 x optional CAN/OBDII module (CAN Bus
2.0B or OBDII SAE J1939)
-8 x Programmable GPIO (Digital Input)
Input voltage (internal type): 5VDC TTL (default) Input voltage (source type):
3 ~ 12VDC (Digital Output) Digital output (sink type): 5VDC TTL (default), max
current: 20mA Digital output (source type): 3 ~ 24VDC, max current: 150mA
1 x 12VDC output (2A), SM Bus
4 x antenna hole for WWAN/WLAN/BT/GPS
1 x Fuse (15A)
Power Management
Selectable boot-up & shut-down voltage
for low power protection by software
Setting 8-level power on/off delay time by
software
Status of ignition and low voltage can be
detected by software
Support S3/S4 suspend mode
Operating System
Windows 8, WES8
Window 7, WES7
Linux kernel 3.X
Dimensions
260mm (W) x 206mm (D) x 79.5mm (H)
(10.24" x 8.11" x 3.13")
Weight: 2.5kg
Environment
Operating
temperatures: -30°C to 55°C (w/ industrial SSD) with air flow -20°C to 45°C (w/
commercial HDD) with air flow
Storage temperatures:
-35°C to 85°C
Relative
humidity: 10% to 90% (non-condensing)
Vibration
(random): 1.5g@5 ~ 500 Hz (in operation, HDD), 2g@5 ~ 500 Hz (in operation,
SSD)
Vibration
(SSD/HDD): Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US
highway truck vibration exposure Storage: MIL-STD-810G, Method 514.6, Category
24, minimum integrity test
Shock
(SSD/HDD): Operating: MIL-STD-810G, Method 516.6, Procedure I, functional
shock=20g Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard
shock test=75g
Standards/Certifications
CE approval
FCC Class B
E13 Mark
Meer informatie of een prijsopgave? Neem contact met ons op.